Welcome to MTV Inc. Online Store
Pico Macom :: Rack-Mounted Satellite Multiswitch (8 Outputs) (Model: TSMS-2150X-8AUV)
Product Discription: Pico Macom's TSMS-2150X-8AUV rack-mounted satellite multiswitches can be used in every SMATV application requiring satellite 950-2150MHz IF distribution. The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall. The TSMS-2150X-8AUV allows 2 LNB inputs and 1 off-air antenna input (40-806 MHz) and provides 8 outputs. The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13-14V Right-Circular/Vertical or 17-18V Left-Circular/Horizontal switching control supplied by the satellite receivers, thus eliminating digital artifacts that result from mechanical relay switching. To compensate for insertion loss, both versions use separate built-in amplifiers for satellite and/or VHF/UHF signals. The TSMS-2150X-8AUV, used with the external power supply, will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit.
Wide frequency range 40~2150 MHz
Simple interface design provides 2 satellite polarity inputs and 8 outputs, for quick installation
PIN diode matrix reduces polarity transfer time and digital artifacts, providing consistent picture quality
500 mA voltage power pass-through reduces cost by providing satellite receiver path for LNB power
Built-in amplifier compensates for insertion losses, reducing need of external amplification
Antenna signal combines with satellite on output, eliminating external combining and reducing cost and clutter
External UL Approved power supply reduces heat buildup, thus increasing unit life
Dimensions: 19” W x 1.75” H x 2.87” D
Weight: 4.5 lbs
Data Sheet: PDF
Price:
Pico Macom :: Rack-Mounted HDTV Satellite Multiswitches (8 Outputs) (Model: TSMS-5-8RK)
Product Discription:
Pico Macom's TSMS rack-mounted satellite multiswitch can be used in every SMATV application requiring satellite 950-2150MHz IF distribution. The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall. The TSMS is compatible with DIRECTV phase three dish reception systems by allowing 4 LNB inputs and 1 antenna and providing 8 outputs. A constant 22 kHz tone is provided on 2 of the input ports and 14 or 18 dc volts are provided to power the LNB and conduct internal switching. The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13-14V Right-Circular/Vertical or 17-18V Left-Circular/Horizontal switching control supplied by the satellite receivers, thus eliminating digital artifacts that result from mechanical relay switching. To compensate for insertion loss, the TSMS uses separate built-in amplifiers for satellite and/or VHF/UHF signals. The TSMS will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit.
Wide frequency range 40~2150 MHz
Compatible with DIRECTV Phase III and other reception systems that utilize 22 kHz tone switching
Simple interface design provides 4 satellite polarity inputs plus 1 antenna and 8 or 16 outputs, for quick installation
PIN diode matrix reduces polarity transfer time and digital artifacts, providing consistent picture quality
14 or 18 DC volts and 22 kHz tone are provided to power the LNB and conduct internal switching
Built-in amplifier compensates for insertion losses, reducing need of external amplification
Heavy-duty high efficiency internal power supply eliminates excessive current draw requirements on receivers
Dimensions: 19” W x 1.75” H x 3” D
Weight: 4.8 lbs
Price:
Pico Macom :: Rack-Mounted 2x16 Satellite Multiswitch (16 Outputs) (Model: TSMS2150X-16AUV)
Product Discription:
Pico Macom's TSMS-2150X-16AUV rack-mounted satellite multiswitches can be used in every SMATV application requiring satellite 950-2150MHz IF distribution. The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall. The TSMS-2150X-16AUV allows 2 LNB inputs and provides 16 outputs. The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13-14V Right-Circular/Vertical or 17-18V Left-Circular/Horizontal switching control supplied by the satellite receivers, thus eliminating digital artifacts that result from mechanical relay switching. To compensate for insertion loss, both versions use separate built-in amplifiers for satellite and/or VHF/UHF signals. The TSMS-2150X-16AUV, used with the external power supply, will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit.
Wide frequency range 950~2150 MHz
Simple interface design provides 2 satellite polarity inputs and 16 outputs, for quick installation
PIN diode matrix reduces polarity transfer time and digital artifacts, providing consistent picture quality
500 mA voltage power pass-through reduces cost by providing satellite receiver path for LNB power
Built-in amplifier compensates for insertion losses, reducing need of external amplification
External UL Approved power supply reduces heat buildup, thus increasing unit life
Dimensions: 19” W x 1.75” H x 2.87” D
Weight: 4.5 lbs
Data Sheet: PDF
Price:
Pico Macom :: Rack-Mounted HDTV Satellite Multiswitches (16 Outputs) (Model: TSMS-5-16RK)
Product Discription:
Pico Macom's TSMS rack-mounted satellite multiswitch can be used in every SMATV application requiring satellite 950-2150MHz IF distribution. The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall. The TSMS is compatible with DIRECTV phase three dish reception systems by allowing 4 LNB inputs and 1 antenna and providing 8 outputs. A constant 22 kHz tone is provided on 2 of the input ports and 14 or 18 dc volts are provided to power the LNB and conduct internal switching. The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13-14V Right-Circular/Vertical or 17-18V Left-Circular/Horizontal switching control supplied by the satellite receivers, thus eliminating digital artifacts that result from mechanical relay switching. To compensate for insertion loss, the TSMS uses separate built-in amplifiers for satellite and/or VHF/UHF signals. The TSMS will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit.
Wide frequency range 40~2150 MHz
Compatible with DIRECTV Phase III and other reception systems that utilize 22 kHz tone switching
Simple interface design provides 4 satellite polarity inputs plus 1 antenna and 8 or 16 outputs, for quick installation
PIN diode matrix reduces polarity transfer time and digital artifacts, providing consistent picture quality
14 or 18 DC volts and 22 kHz tone are provided to power the LNB and conduct internal switching
Built-in amplifier compensates for insertion losses, reducing need of external amplification
Heavy-duty high efficiency internal power supply eliminates excessive current draw requirements on receivers
Dimensions: 19” W x 1.75” H x 3” D
Weight: 4.8 lbs
Price:
Back to Our Online Store >>
MTV has done a commendable job at our property. They not only did cabling but did nice layout, tagging and labling to help solve future problems. My commercial DirecTV Satellite system is working fine and whenever there is any problem, they are just a call away. I will highly recommend them to any property owner. Impressive!
I was actually looking for someone for on-line reservation and enhancing my room revenue in this difficult times. MTV designed our website and integrated with out existing Check-inn front desk system within a week! They even trained our Manager. Now we enjoy higher occupancy. Thank MTV for the splendid work. Full marks!